For interiors where a simple, angled line suits the room better than a rounded or heavily detailed edge, Colonial Wall Linings‘ Splayed Skirting & Architraves offer a clean alternative. The splayed face runs at a gentle angle from the wall, giving modern interiors a subtle shadow line without raised beading or curved detail competing with the rest of the space.
Use the < > keys below to scroll through the images:
Splayed Skirting & Architraves – MDF Mouldings Size Chart:
| SIZE | CODE |
|---|---|
| 68 x 18 | PRMM06818SPL |
| 90 x 18 | PRMM09018SPL |
| 140 x 18 | PRMM14018SPL |
A splayed skirting board isn’t flat across its whole face. The lower section sits square to the wall, then angles back toward the top edge, creating a splay that catches light differently to a plain square board. That single angled line is often all a room needs to read as finished, which is why splay skirting is a well-suited choice in contemporary builds and renovations aiming for a minimal look.
There’s no raised bead or curve running along the length, so there’s less detail to paint around and less surface for dust to gather on. The result is a board that reads as considered rather than plain, without pulling attention away from doors, walls and floors the way a heavier profile might.
This range is manufactured from moisture-resistant MDF, chosen for its smooth, consistent surface. That consistency matters most on a splayed profile.
Each length is supplied pre-primed, helping reduce preparation before final painting. That saves painters a step before the first coat goes on and helps the finish sit evenly across the full run of skirting.
This profile suits a wide range of rooms and applications, including:
Despite the angled face, this profile handles on-site the same way any well-made MDF board does. It cuts cleanly, mitres accurately, and holds a tight join at corners and returns, following the same installation practice as any other MDF skirting and architrave.
Once painted, the surface holds up well under everyday use, giving you a durable, low-maintenance finish that suits busy family homes as much as it does a considered architectural build.
If your project calls for timber rather than MDF, Colonial Wall Linings also Colonial Wall Linings also offers a broader range of finger-jointed pine mouldings. If you’re not sure which material is the better fit for your build, our team can talk you through the options on hand.
Seal all cut ends before painting. Check that walls and floor lines are square before you start fixing lengths. Taking care at this stage helps the finish stay clean, and careful preparation helps achieve a cleaner finished result.
What’s the difference between splayed and half-splayed skirting?
A splayed profile is angled on both faces of the board, while a half-splayed profile is angled on one face only, with the other left flat. This range is fully splayed rather than half-splayed.
Will this profile suit an older home, or is it only for modern builds?
It’s most at home in modern interiors and newer builds, though it can also work well in a renovated older home where a simpler, less ornate skirting is wanted.
Does the board need any prep before painting?
It arrives primed, but cut ends and any filled joints still need to be sealed before your finish coats go on.
Can skirting and architrave be ordered in different sizes for the same room?
Yes, though most projects keep the two proportionate for a consistent look throughout. Get in touch if you’d like advice on sizing.
What if I need a length or size that isn’t listed?
Ask our team about custom options, or check our full skirting and architrave range for an alternative profile that might suit.
If you’re specifying Splayed Skirting and Architraves for a modern build or renovation, our team can help you choose the right size and confirm what you need for your project.
Contact us today for stock availability, pricing, or general product advice.